USB 2.0 to 1S x Serial RS-232 ports (FTDI) for temperature from -40°C to +85°C

The USB 2.0 to RS-232 cable with A connector provides a serial RS-232 high performance UART 16C550 output. It supports extended temperatures from -40°C to +85°Celsius. It is designed to add another serial output for PC, small workstation or server via USB 1.1, 2.0 or 3.2 Gen 1 bus. With easy installation, there is no need to open the computer and EX-1311-2T can be installed while the computer is running. A 9M to 9M adapter is included, as well as two nuts that can be easily replaced with the thumbscrews if the cable to be connected has screws.

• Interface RS-232 V.24
• Extended temperature range from -40°C to +85°Celsius
• 16C550 FIFO Buffer with 16Byte
• I/O addresses and interrupt is set from the operating system
• Data bits: 7 and 8
• Stop bits: 1, 1.5 and 2
• Parity: none, even, odd, space and mark
• Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Power from the USB Bus (Bus Power)
• LED Display for RX and TX
• Adapter with 9 pin male to 9 pin male incl. nuts
• Chipset: FDTI

Packaging contents:
EX-1311-2T, Driver CD, 2x hex nuts, Manual