Wir versenden mit UPS

2S PCIe Serial RS-232/422/485 Board incl. LP bracket and Octopus cable

CHF91.90 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • EX-45362
The EX-45362 PCIe I/O card provides two serial RS-232, 422 and 485 high performance UART 16C550... more
Product information

The EX-45362 PCIe I/O card provides two serial RS-232, 422 and 485 high performance UART 16C550 outputs. Each port can be independently configured as RS-232, 422 or 485. It is designed to add two more serial combo ports for PC, workstation or server via PCIe bus. The card is fully PCIe plug-and-play compatible and has no conflicts with IRQ and I/O addresses. It supports the ATTA Auto RS-485 transmitter features. In addition, +5V or +12V on pin 9 of the RS-232 serial connector is configurable for a POS system (Power over System). A low profile bracket for narrow PC cases is supplied with the card.

  • Interface: 2x RS-232 V.24, RS-422/485 - independent mode selection
  • ±15kV IEC1000-4-2 ESD Schutz for RS232 I/O's
  • FIFO Buffer: 16C550 with 128Byte
  • Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
  • Parity: none, even, odd, space, mark
  • Signal:
    • RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
    • RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
    • RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
    • RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
  • Support ATTA Auto Transmitter
  • Termination RS-422/485: 120 ohm, can be enabled or disabled
  • Support PCIe slot version 1.0 to 3.0

Packaging contents:
EX-45362, Octopus cable, Low Profile bracket, Driver CD, Manual

Category: Serial cards
Interface: RS-232/422/485
Number of ports: 2
Bus system: PCIe x1
Connections: 9-pin plug
Mounting Type: Standard / Low Profile
Power connection: 4-pin floppy
Related links
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "2S PCIe Serial RS-232/422/485 Board incl. LP bracket and Octopus cable"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed