USB 3.2 Gen 2x1 to mSATA RAID 0/1 with 2.5-inch metal frame (7mm)

The EX-3680 converter can be used as a replacement for a 2.5" hard disk or SDD. For the connection of the EX-3680 a USB 3.0 port on the mainboard or a USB 3.0 controller is required. Half Size as well as Full Size modules can be used.

• USB 3.2 Gen 2x1 to 6Gbps SATA 3 Hardware RAID Controller
• Converts 2x Full Size mSATA SSD to USB 3.2 Gen 2x1 2.5-inch case with 7 mm height
• Supports with Jumper RAID 0, 1, JaOBD
• Supports two SATA 2 and SATA 3 (6Gbps) mSATA SSD
• Supports ATA/ATAPI Packet Command Set
• Supports ATA/ATAPI LBA 48 Addressing Mode
• 100% compatible with 2.5-inch SATA drive mechanical specification
• Supports USB 3.2, 3.0 and 2.0 mainboard
• Compliant with Universal Serial Bus 3.1 specification Rev. 1.0
• Power from the USB 3.2 Micro-B 5V Bus
• Transparent to the operating system, no driver needed

Packaging contents:
EX-3680, 4x screws for mounting the 2.5" frame, manual