Dual PoE Ethernet 1Gigabit LAN PCIe (x1) Network card, incl. LP bracket

The EX-6072PoE-2 is a fast Dual Gigabit Ethernet card designed for the PCIe bus. It supports Power over Ethernet and has a data transfer rate of up to 1000Mbit per second per port. The EX-6072PoE-2 supports Half and Full Duplex as well as NWay Auto-Negotiation to automatically adapt to the network speed (10/100/1000 Mbps.). Furthermore, the card is equipped with Auto-MDI/MDI-X. It also offers very extensive support for various operating systems. Any PoE-capable end devices can be connected to the EX-6072PoE-2. A low profile bracket is supplied with the card for installation in a narrow PC housing.

• Supports 10/100/1000 Base-T Ethernet standards
• Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W
• Maximum Power Delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W
• Supports Auto-MDI/MDI-X Auto (for Crossover cable)
• Supports Pair Swap/Polarity/Skew correction
• Wake-on-LAN and Remote Wake up
• Supports Full Duplex Flow Control (IEEE 802.3x)
• Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging,IEEE 802.1P Layer 2 Priority Encoding
• Microsoft NDIS 5 Checksum Offload (IP, TCP, UDP), Supports PCI Message Signaled Interrupt (MSI)
• 48KB Buffer Transmit/Receiver chip
• Activity LED to check the data transfer
• Chipset: 2x Realtek RTL8111G

Packaging contents:
EX-6072PoE-2 Low Profile bracket, Driver CD, Manual