PCIe Quad Network board with 4x 1Gigabit, PoE

The EX-6074PoE-2 is a fast Quad Gigabit Ethernet PCIe card. It can supply end devices such as IP telephones, IP cameras or WLAN access points with a voltage of 48VDC via the network cable. Thus, the end devices do not require additional power sockets or expensive switches that support PoE. The EX-6074PoE-2 is a cost-effective solution with a maximum power of 34.20 W and a maximum data transfer rate of 1000 Mbps. The various end devices can be supplied with power directly via the data lines. This saves costs and you increase the flexibility where the end devices are installed. The EX-6074PoE-2 supports Half and Full Duplex as well as Nway Auto-Negotiation to automatically adapt to the speed in the network (10/100/1000 Mbit/sec.). Furthermore, the card is equipped with Auto-MDI/MDI-X.

• Supports four PoE Gigabit Ethernet port with 15.40W or 30.20 W
• Supplies network end devices with power over the data line
• Supports 10/100/1000 Base-T Ethernet standard
• Fully compatible with IEEE 802.3at PoE+ (PSE) Type 1 and 2 operation
• Maximum power output: Type 1 = 15.40 W / Type 2 = 30.20 W
• Supports Auto-MDI/MDI-X Auto (for crossover cable)
• Supports Pair Swap/Polarity/Skew Correction
• Wake-on-LAN and remote wake-up
• Supports Full Duplex Flow Control (IEEE 802.3x)
• Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
• 48KB Buffer Transmit/Receiver Chip / LED indication of data transmission
• Chipset: 4x Realtek RTL8111G

Packaging contents:
EX-6074PoE-2, Driver CD, Manual