Wir versenden per Post

USB 2.0 to 1S serial RS-232 port with +5V on pin 9 (FTDI chip set)

CHF32.90 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • EX-1311-2-5V
The USB 2.0 to RS-232 cable with A-connector provides a serial RS-232 high performance UART... more
Product information

The USB 2.0 to RS-232 cable with A-connector provides a serial RS-232 high performance UART 16C550 output. It supports the external voltage of +5V especially on pin 9 of the connector. It is designed to extend another serial output for PC, small workstation or server via the USB 1.1, 2.0 or 3.2 Gen1 bus. Due to the easy installation there is no need to open the computer and the EX-1311-2-5V can be installed during operation. Two nuts are included, which can easily be replaced with the thumbscrews if the cable to be connected has screws.

  • Interface: RS-232 V.24 with +5V on pin 9 by the connector
  • FIFO Buffer: 16C550 with 16Byte
  • I/O addresses and Interrupt: Set from the operating system
  • Data Bits: 7 and 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
  • Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
  • LED Display for RX and TX
  • Power from the USB Bus (Bus Power)
  • Exchangeable screw with hex nuts
  • Chip-Set: FTDI
Category: USB to RS-232
Interface: RS-232/+5V
Connections: 9 pin plug
Number of ports: 1
Power connection: Bus power
Design: Cable
Housing: Plastic
Colour: black
Cable length meter: 1.8
Related links
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "USB 2.0 to 1S serial RS-232 port with +5V on pin 9 (FTDI chip set)"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed