Wir versenden mit UPS

USB 2.0 to 1S serial RS-232 port with +5V on pin 9 (FTDI Chipset)

CHF32.89 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • EX-1311-2-5V
The USB 2.0 to RS-232 cable with A-connector provides a serial RS-232 high performance UART... more
Product information

The USB 2.0 to RS-232 cable with A-connector provides a serial RS-232 high performance UART 16C550 output. It supports the external voltage of +5V especially on pin 9 of the connector. It is designed to extend another serial output for PC, small workstation or server via the USB 1.1, 2.0 or 3.2 Gen 1 bus. Due to the easy installation there is no need to open the computer and the EX-1311-2-5V can be installed during operation. Two nuts are included, which can easily be replaced with the thumbscrews if the cable to be connected has screws.

  • Interface: RS-232 V.24 with +5V on pin 9 by the connector
  • FIFO Buffer: 16C550 with 16Byte
  • I/O addresses and Interrupt: Set from the operating system
  • Data Bits: 7 and 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
  • Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
  • LED Display for RX and TX
  • Power from the USB Bus (Bus Power)
  • Exchangeable screw with hex nuts
  • Chipset: FTDI

Packaging contents:
EX-1311-2-5V, Driver CD, 2x hex nuts, Manual

Category: USB to serial converter
Interface: RS-232/+5V
Number of ports: 1
Inputs: USB-A plug
Outputs: 9-pin plug
Power connection: Bus power
Design: Cable
Temperature range: 0°C to +55°C
Cable length: 1.8m
Colour: black
Housing: Plastic
Related links
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "USB 2.0 to 1S serial RS-232 port with +5V on pin 9 (FTDI Chipset)"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Viewed