SATA3 to 2x mSATA SSD & SATA 2 with 2.5-inch metal frame, RAID 0/1

The EX-3684 converter can used for a replacement of a 2.5-inch hard drive or SSD. For connect the EX-3684 need a SATA 3 connector from the mainboard or from a SATA 3 controller. You can use the mSATA module: Half Size and Full Size. In the same time it’s possible to connect two other hard drive or SSD to the two SATA 2 ports. The EX-3684 support RAID 0 / 1 and JBOD. Included it’s a bracket for install vertical in the PC. 

• Built-in ASM1092R high performance processor
• Supports Half Size or Full Size module
• 100% compatible with 2.5-inch SATA drive mechanical specification
• Support RAID mode: RAID 0 (fast) / RAID 1 (safe) and JBOD (volume)
• RAID mode switch by hardware strapping or GUI controller
• 22 pin SATA connector (signal and power)
• Support SATA 3 Revision 3.2
• Transparent to the operating system and don’t need driver
• Additional it’s include a bracket for install on the backside from the PC

Packaging contents:
EX-3684, 4x screws for mounting the 2.5" frame, 1x bracket, manual