Ethernet PoE to 2 x RS-232/422/485 port, incl. 12V/3A power supply

The EX-6122PoE is a multi-protocol serial device server designed to connect RS-232/422/485 serial devices, including POS, barcode readers, sensors, meters, weighing systems, CNC controllers, and PLCs, to an IP-based Ethernet network. The serial devices are connected via Ethernet and available for sharing on the sub-network and Internet, with remote configuration via various network protocols such as TCP server, TCP client, UDP, VCOM, serial Telnet, RFC2217, remote pair master slave, Modbus RTU. To be backward compatible with the legacy serial device running the existing COM port application software, the EX-6122PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6122PoE supports Power over Ethernet and can be powered by the network via the Ethernet cable according to IEEE802.af PoE standard. In addition, serial devices with remote pair master-slave mode can communicate with each other via peer-to-peer mode without the need for an intermediate PC or conversion software.

• Interface RS-232 V.24/422/485 with 8 ports, selected by DIP switches
• 15KV ESD Surge Protection for all serial signals
• Fully IEEE 802.3af compliant PoE (PSE) type 1 = 15.40W and IEEE802.3at PoE+ (PSE) type 2 = 34.20W
• Data Bits: 5, 6, 7, 8 / Parity: None, Even, Odd, Mark, Space
  
  
• Signal:
• RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD und GND
• RS-422: TXD+, TCD-, RXD+ RXD-, GND
• RS-485: 2 wire - Data+, Data-, GND
• RS-485: 4 Draht - TXD+, TCD-, RXD+, RXD-, GND
  
• Ethernet Protocol:
• TCP Server, TCP Client, UPD, VCOM, Serial Telnet
• RFC2217, Remote-Pair-Master-Slave
• Modbus Server, Modbus Client

• Direct connection with Socket Port
• Point to point connection, no software required
• Virtual COM Software included
• Rugged Metal Case with Wall-Mount and Din-Rail Kit